16x16 Pro-Matrix Help Info
              

=============== System Information Command
?/HELP         Print Help Information
STATUS         Print System Status And Port Status
=============== System Control Command
PON            Power On, System Run On Normal State
POFF           Power Off, System Run On Power Save State
IR ON/OFF      Set System IR Control On Or Off
KEY ON/OFF     Set System Key Control On Or Off
BEEP ON/OFF    Set Onboard Beep On Or Off
LCD ON/OFF     Set LCD Always On Or Auto Turn Off In Power On State
RSB x          Set RS232 Baud Rate To X bps
               x=[0:115200, 1:57600, 2:38400, 3:19200, 4:9600]

RESET          Reset System To Default Setting
RESET ALL      Reset System And Network To Default Setting
               (Should Type "Yes" To Confirm, "No" To Discard)
=============== Input And Output Port Connect Command
IN CSC ON/OFF  Set All Input Ports CSC Mode On Or Off
IN xx UHD ON/OFF  Set Input: xx Edid Support UHD Mode On Or Off
               xx=[00]: All Input Port, [01...16]: Input Port

OUT xx ON/OFF  Set Output: xx On Or Off
OUT xx FR yy   Set Output: xx From Input:yy
OUT xx EH/ET   Set Output: xx Use HDMI/HDBT EDID
OUT CSC ON/OFF Set All Output HDBT Ports CSC Mode On Or Off
               xx=[00]: All Output Port, [01...16]: Output Port
               yy=[01...16]: Input Port

POC TX xx ON/OFF  Set Output: yy POC On Or Off
               xx=[00]: All Output Port, [01...16]: Output Port

PRESET STATUS: Print Preset Config Status
PRESET pp SET aa,bb,cc,dd,ee,ff,gg,hh ,ii,jj,kk,ll,mm,nn,oo,pp: Set Preset: pp C                                                                                                             onfig
PRESET pp SAVE:  Save Current Output Connection To Preset: pp Config
PRESET pp APPLY: Apply Preset: pp Config To Output Connection
               pp=[01..08]: Select Preset Index
               aa=[01..16]: Output 01 From aa, [00]: Not Set
               bb: Output 02 ... pp: Output 16
=============== EDID Control Command
EDID xx CP yy  Set Input: xx EDID Copy From Output:yy
EDID xx DF zz  Set Input: xx EDID To Default EDID:zz
EDID SAVE yy TO ss  Save Output: yy EDID To User Memory: ss
               xx=00: Select All Input Port
               xx=[01...16]: Select One Input Port
               yy=[01...16]: Select One Output Port
               ss=[01...02]: User EDID Memory
               zz=00: HDMI 1080p@60Hz, Audio 2CH PCM(Default)
               zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
               zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
               zz=03: HDMI 1080i@60Hz, Audio 2CH PCM
               zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
               zz=05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
               zz=06: HDMI 1080p@60Hz/3D, Audio 2CH PCM
               zz=07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
               zz=08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
               zz=09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM
               zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
               zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
               zz=12: HDMI 4K@60Hz 4:2:0, Audio 2CH PCM
               zz=13: HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
               zz=14: HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
               zz=15: HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
               zz=16: HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
               zz=17: HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
               zz=18: DVI 1280x1024@60Hz, Audio None
               zz=19: DVI 1920x1080@60Hz, Audio None
               zz=20: DVI 1920x1200@60Hz, Audio None
               zz=21: HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM
               zz=22: User EDID 1
               zz=23: User EDID 2
=============== Matrix IR Connect Command
MXIR xx FR yy  Remote RX: xx IR Output From Local IR in: yy
               xx=[00]: All Remote Rx IR Output, [01...16]: Remote Rx IR Output
               yy=[01...16] Local IR In

MXIR GI (+-)xx Global All Ir In Signal Goes To Which IR Output: xx
               xx=[17...32]: Local IR Output
               xx=[33...48]: Remote HDBT Receiver IR Output
               +: Add xx To Current Setting
               -: Remove xx From Current Setting

MXIR GO (+-)xx Global All Ir Out Signal From Which IR Input: xx
               xx=[17...32]: Local IR Input
               xx=[33...48]: Remote HDBT Receiver IR Input
               xx=[49]: Global All Ir In
               +: Add xx To Current Setting
               -: Remove xx From Current Setting

MXSTA          Print Matrix IR  Connect State
=============== Audio Connect Command
AUD RX xx ORG   Input Port: xx Use Orginal Received HDMI/DVI Signal
AUD RX xx ANA   Input Port: xx Embed Analogue L/R To HDMI/DVI Signal
AUD RX xx DANTE Input Port: xx Embed Dante Audio To HDMI/DVI Signal
AUD RX xx AUTO  Input Port: xx Embed Analogue L/R When DVI Signal
                xx==[00]: All Input Port, [01...16]: Input Port

MUTE ON/OFF TX yy Set Output Audio: yy Mute On or Off
                yy=[00]: All Output Audio, [01...16]: Output Audio
AUD STA         Print Input/Output Port Audio Setting State
=============== Network Control Command
NET DHCP ON/OFF: Set Auto IP(DHCP) On Or Off
NET IP xxx.xxx.xxx.xxx: Set IP Address
NET GW xxx.xxx.xxx.xxx: Set Gateway Address
NET SM xxx.xxx.xxx.xxx: Set Subnet Mask Address
NET RB: Set Network Reboot And Apply New Config!!!
NET TN xxxx: Set Telnet Port