HDMI CMX44CS Help Info
              

============= System Information Command
?             Print Help Information
HELP          Print Help Information
STATUS        Print System Status And Port Status
FWVER         Print All Firmware Version

============= System Control Command
PON           Power On, System Run On Normal State
POFF          Power Off, System Run On Power Save State
REBOOT        Set System And Network Reboot
IR ON/OFF     Set System IR Control On Or Off
KEY ON/OFF    Set System KEY Control On Or Off
BEEP ON/OFF   Set Onboard Beep On Or Off
LCD ON/OFF    Set Front Panel LCD Always On
                Or Auto Turn Off In Power On State
RSB x         Set RS232 Baud Rate to X bps
              x=[0:115200 1:57600, 2:38400, 3:19200, 4:9600]
RESET         Reset System To Default Setting
RESET ALL     Reset System And Network To Default Setting
              (Should Type "Yes" To Confirm, "No" To Discard)

============= Input And Output Port Control Command
OUT xx ON/OFF Set Output:xx On Or Off
OUT xx SCALING yy Set Output:xx Video Mode yy
              xx=00: Select All Output Port
              xx=[01...04]: Select One Output Port
              yy=[01]: Select Output Port Video Mode Bypass
              yy=[02]: Select Output Port Video Mode Force_1080p
              yy=[03]: Select Output Port Video Mode Match TV
OUT xx FR yy  Set Output:xx From Input:yy
EDID xx CP yy Set Input:xx EDID Copy From Output:yy
EDID xx DF zz Set Input:xx EDID To Default EDID:zz
              xx=00: Select All Input Port
              xx=[01...04]: Select One Input Port
              yy=[01...04]: Select One Output Port
              zz=00: HDMI 1080p@60Hz, Audio 2CH PCM
              zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
              zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
              zz=03: HDMI 1080i@60Hz, Audio 2CH PCM
              zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
              zz=05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
              zz=06: HDMI 1080p@60Hz/3D, Audio 2CH PCM
              zz=07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
              zz=08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
              zz=09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM
              zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
              zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
              zz=12: DVI 1280x1024@60Hz, Audio None
              zz=13: DVI 1920x1080@60Hz, Audio None
              zz=14: DVI 1920x1200@60Hz, Audio None
              zz=15: User EDID 1
              zz=16: User EDID 2
              zz=17: GUI Download EDID
              zz=18: HDMI 4K@60Hz 4:2:0, Audio 2CH PCM
              zz=19: HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
              zz=20: HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
              zz=21: HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
              zz=22: HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
              zz=23: HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD

PRESET STATUS : Print Preset Config Status
PRESET pp SET aa,bb,cc,dd : Set Preset:pp Config
PRESET pp SAVE : Save Current Output Connection To Preset:pp Config
PRESET pp APPLY : Apply Preset:pp Config To Output Connection
              pp=[01..08]: Select Preset Index
              aa=[01..04]: Output 01 From aa, [00]: Not Set
                 bb: Output 02 ... dd: Output 04

============= Audio Control Command
AUD RX xx ORG   Input Port:xx Use Original Receive HDMI/DVI Signal
AUD RX xx ANA   Input Port:xx Embeded Analogue L/R To HDMI/DVI Signal
AUD RX xx AUTO  Input Port:xx Embeded Analogue L/R When DVI Signal
                xx==[00]: All Input Port, [01...04]: Input Port

============= Network Control Command
NET DHCP ON/OFF : Set Auto IP(DHCP) ON Or OFF
NET IP xxx.xxx.xxx.xxx : Set IP Address
NET GW xxx.xxx.xxx.xxx : Set Gateway Address
NET SM xxx.xxx.xxx.xxx : Set Subnet Mask Address
NET RB : Set Network Reboot and Apply New Config!!!
NET TN xxxx : Set Telnet Port
NET DNS xxxx : Set DNS Domain Name To xxxx