DA44AU Dante Audio Matrix
              

============= System Information Commands
?/HELP        Print Help Information
STATUS        Print System Status And Port Status
============= System Control Commands
RESET         Reset System To Default Setting
              (Type "Yes" To Confirm, "No" To Discard)
PRESET xx APPLY  Apply Preset xx
MUTE xx OUT yy   Mute On/Off Output yy
                 xx= On or Off
                 yy=[00]: All Output Ports, [01...04]: Output Port
IN xx AUD yy zz  Set Mic/Line Input And Sensitivity
                 xx=[00]: All Input Ports, [01...04]: Input Port
                 yy=MIC or LINE
                 zz=00: MIC: 00dB   LINE: -10dB
                 zz=01: MIC: 05dB   LINE: 00dB
                 zz=02: MIC: 10dB
                 zz=03: MIC: 15dB
                 zz=04: MIC: 25dB
                 zz=05: MIC: 35dB
IN xx PHA yy     Set Input Phantom Power On/Off
                 xx=[00]: All Input Ports, [01...04]: Input Port
                 yy= ON or OFF
============= RS232 Control Commands
RS232BAUD z   Set RS232 Baud Rate To z
                 z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600
                     7 115200 

(default)                                                          
============= Network Control Commands
NET DHCP ON/OFF  Set Auto IP (DHCP) On Or Off
NET IP xxx.xxx.xxx.xxx  Set IP Address
NET GW xxx.xxx.xxx.xxx  Set Gateway Address
NET SM xxx.xxx.xxx.xxx  Set Subnet Mask Address
NET RB        Set Network Reboot And Apply New Config!!!