HD11CTRL-V2 HDMI In-Line Control Module ============= System Information Commands ?/HELP Print Help Information STATUS Print System Status And Port Status INSTA Print All Input Status OUTSTA Print All Output Status CTRLSTA Print All Control Status ============= System Control Commands KEY ON/OFF Set System Key Control On Or Off IR ON/OFF Set System IR Control On Or Off IN FHPD ON/OFF Set Input Force HPD On Or Off NOSIGDLY x Set No Signal Delay Timeout To xxxxx Second(s) NOSENSORDLY x Set System Off Time To x Second(s) (Default 600s, Range From 0s To 10800s) When No Sensor Signal Has Been Detected, The System Will Turn Off After The Set Time RESET Reset System To Default Setting (Type ""Yes"" To Confirm, ""No"" To Discard) TRGON x Set The Trigger Method x To Perform System On x = 1 - Sensor Only x = 2 - HDMI Only (5V)(default) x = 3 - HDMI Only (TMDS) x = 4 - Sensor Or HDMI (5V) x = 5 - Sensor Or HDMI (TMDS) x = 6 - CEC (when CEC On : CECOP_IMAGE_VIEW_ON = 0x04 is received) TRGOFF x Set The Trigger Method x To Perform System Off x = 1 - No Sensor Only x = 2 - No HDMI Only (5V)(Default) x = 3 - No HDMI Only (TMDS) x = 4 - No Sensor And HDMI (5V) x = 5 - No Sensor And HDMI (TMDS) x = 6 - CEC (When CEC Off : CECOP_STANDBY = 0x36 is Received) OUT x SCALING ON/OFF Set Output x Scaling On Or Off x = 00 - All Output x = 01 - Output 01 EDID x DF y Set Input xx EDID To Default EDID zz (EDID Dip Switch Must Be Swit ched To EDID Software) x = 00: Select All Input Port x = 01: Select One Input Port y = 00: HDMI 1080p@60Hz, Audio 2CH PCM (Default) 01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY 02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD 03: HDMI 1080i@60Hz, Audio 2CH PCM 04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY 05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD 06: HDMI 1080p@60Hz/3D, Audio 2CH PCM 07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY 08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD 09: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 2CH PCM 10: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY 11: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD 12: HDMI 4K@60Hz 4:2:0, Audio 2CH PCM 13: HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY 14: HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD 15: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM 16: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY 17: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD 18: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 2CH PCM 19: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 5.1CH DTS/DOLBY 20: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 7.1CH DTS/DOLBY/HD 21: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 2CH PCM 22: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 5.1CH DTS/DOLBY 23: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 7.1CH DTS/DOLBY/HD 24: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 2CH PCM 25: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 5.1CH DTS/D OLBY 26: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 7.1CH DTS/D OLBY/HD 27: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 2CH PCM 28: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 5.1CH DTS/D OLBY 29: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 7.1CH DTS/D OLBY/HD 30: DVI 1280x1024@60Hz, Audio None 31: DVI 1920x1080@60Hz, Audio None 32: DVI 1920x1200@60Hz, Audio None 33: HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM 34: User EDID 1 35: User EDID 2 36: EDID Passthrough EDID x CP y Copy EDID From Output y To Input x EDIDSAVE x Load The Custom External EDID From USB, Then Save It Into Slot xx x = 34: User EDID 1 x = 35: User EDID 2 ============= Relay Control Commands RELAY x ENABLE Set Relay x ENABLE RELAY x DISABLE Set Relay x DISABLE x = 00: All Relays x = 01: Relays 1 x = 02: Relays 2 RELAY x MODE y Set Relay x to Mode y x = 00: All Relays x = 01: Relays 1 x = 02: Relays 2 y = 01: Disable NO And Enable NC y = 02: Enable NO And Disable NC RELAY1 x Set The Relay 1 Time To x (Default 10s, Range From 3s To 180s, 0=F ixed Open, 1=Not Use) RELAY2 x Set The Relay 2 Time To x (Default 10s, Range From 3s To 180s, 0=F ixed Open, 1=Not Use) ============= IR Control Commands IRLEARN x Learn IR Command Into Slot x x = 1 Learn IR Display On x = 2 Learn IR Display Input Select x = 3 Learn IR Display Off 1 x = 4 Learn IR Display Off 2 x = 5 Learn IR User Command 1 x = 6 Learn IR User Command 2 x = 7~30 Learn IR Command 7~30 IREDIT x:y EDIT IR Command x x = 1 IR Display On Command x = 2 IR Display Input Select Command x = 3 IR Display Off 1 Command x = 4 IR Display Off 2 Command x = 5 IR User Command 1 Command x = 6 IR User Command 2 Command x = 7~30 IR Command 7~30 Command y = New IR Command IRDEL x Delete IR Command In Slot x x = 1 Delete IR Display On x = 2 Delete IR Display Input Select x = 3 Delete IR Display Off 1 x = 4 Delete IR Display Off 2 x = 5 Delete IR User Command 1 x = 6 Delete IR User Command 2 x = 7~30 Delete IR Command 7~30 IRSEND x Learn IR Command In Slot x x = 1 Send IR Display On x = 2 Send IR Display Input Select x = 3 Send IR Display Off 1 x = 4 Send IR Display Off 2 x = 5 Send IR User Command 1 x = 6 Send IR User Command 2 x = 7~30 Send IR Command 7~30 IRDLY x Set Sending Interval Time To x Second(s) Between IR Commands (Defa ult 3s, Range From 1s To 180s) IROFFRPT1 x Set x Number Of Times IR Off 1 Command Is Repeated (Default 1 Time , Range 1 To 2 Times) IROFFRPT2 x Set x Number Of Times IR Off 2 Command Is Repeated (Default 1 Time , Range 1 To 2 Times) IROFFRPTDLY x Set Sending Interval Time To x Second(s) Between IR Off Commands ( Default 2s, Range From 1s To 180s) ============= Output CEC Control Commands OUT CECENABLE Enable Output CEC OUT CECDISABLE Disable Output CEC AUTOONCECINPUT y Enable CEC Input Select For Auto ON Macro To Input y OUT CECINPUT y Send Output CEC Input y Command OUT CECPON Send Output CEC Power On Command OUT CECPOFF Send Output CEC Power Off Command OUT CECVOLUP Send Output CEC Vol Up Command OUT CECVOLDOWN Send Output CEC Vol Down Command OUT CECMUTE Send Output CEC Mute Command CECUSERCMD Send User CEC Command u8DevID = 00 Select All CEC Input Port u8DevID = 01 Output 01 u8DevID = F0 Select All CEC Output Port u8DevID = F1 Output 01 pu8Operand[MAX] : MAX 0 - 14 CECOFFRPT x Set The x Number Of Times CEC OFF Command Is Repeated (Default 1 Time, Range 1 To 2 Times) CECONRPT x Set The x Number Of Times CEC ON Command Is Repeated (Default 1 Time, Range 1 To 2 Times) CECRPTDLY x Set The Sending Interval Time In x Second(s) Between CEC OFF Commands (Default 2s, Range From 1s To 180s) CECDLY x Set The Sending Interval Time In x Second(s) Between All CEC Commands (Default 3s, Range From 1s To 180s) CECON:x y z a b Set The CEC Commands After CEC ON Command x y z a b = 1: Power On Command 2: Volup Command 3: Voldown Command 4: Volmute Command 5: Power Off Command CECOFF:x y z a b Set The CEC Commands Before CEC OFF Command x y z a b = 1: Power On Command 2: Volup Command 3: Voldown Command 4: Volmute Command 5: Power Off Command CECON DISABLE Disable Automatic CEC ON Commands When Detecting Signal CECOFF DISABLE Disable Automatic CEC OFF Commands When Not Detecting Signal ============= Input CEC Control Commands IN CECENABLE Enable Input CEC IN CECDISABLE Disable Input CEC INCECMENU Send Input CEC Menu INCECUP Send Input CEC Up INCECVOLUP Send Input CEC Volume Up INCECLEFT Send Input CEC Left INCECENTER Send Input CEC Select INCECRIGHT Send Input CEC Right INCECBACK Send Input CEC Back INCECDOWN Send Input CEC Down INCECVOLDOWN Send Input CEC Volume Down INCECON Send Input CEC On INCECOFF Send Input CEC Off INCECSTOP Send Input CEC Stop INCECBWD Send Input CEC Backward INCECFWD Send Input CEC Next INCECPAUSE Send Input CEC Pause INCECREWIND Send Input CEC Rewind INCECFF Send Input CEC Fast forward INCECPLAY Send Input CEC Play INCECEXIT Send Input CEC Exit ============= RS232 Control Commands RS232BAUD x Set RS232 Baud Rate To x x = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 RS232PARITY x Set RS232 Parity To x x = 0 None(Default), 1 Odd, 2 Even RS232ON x:y:z:a Send y Type Of Command a Stored In Slot x Whose Baud Rate Is z x = 1 Send RS232 Display On x = 2 Send RS232 Display Input Select x = 3 Send RS232 User Command 1 x = 4 Send RS232 User Command 2 y = a ASCII, h HEX z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 a = RS232 Command RS232ON DISABLE Disable Auto RS232 Commands When Detecting A Signal RS232OFF y:z:a Set RS232 Off Command a Of y Type Whose Baud Rate Is z y = a ASCII, h HEX z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 a = RS232 Command RS232OFF DISABLE Disable Auto RS232 Commands When Not Detecting A Signal RS232DLY x Set Sending Interval Time In x Seconds Between RS232 Commands RS232RPT x Set x Number Of Times RS232 OFF Command Is Repeated RS232RPTDLY x Set Sending Interval Time In x Second(s) Between RS232 OFF Commands (Default 2s, Range From 1s To 180s) RS232SEND x:y:z Send z To RS232 Port x = a ASCII,h HEX y = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600(Default), 7 115200 z = RS232 Command ============= Macro Control Commands MACRO x NAME y Set Macro Name x = 01~10 Macro Number y = Name MACRO x TR y Set Macro Detect Signal Trigger Conditions x = 01~10 Macro Number y = 00 Not Specified y = 01 Sensor Only y = 02 No Sensor Only y = 03 HDMI Only (5V) y = 04 No HDMI Only (5V) y = 05 HDMI Only (TMDS) y = 06 No HDMI Only (TMDS) y = 07 Sensor Or HDMI (5V) y = 08 No Sensor And HDMI (5V) y = 09 Sensor Or HDMI (TMDS) y = 10 No Sensor And HDMI (TMDS) MACRO x TRDLY y Set Macro Trigger Delay x = 01~10 Macro Number y = 0~10800 s MACRO x:y MDLY z Set The Macro Event Interval Delay x = 01~10 Macro Number y = 01~10 Macro Event Number z = 0~180 s MACRO x:y RPT z Set The Macro Event Repet Time x = 01~10 Macro Number y = 01~10 Macro Event Number z = 0~2 Time(s) MACRO x:y RPTDLY z Set The Macro Event Repet Delay x = 01~10 Macro Number y = 01~10 Macro Event Number z = 3~180 s MRS232 x:y:z:a:b:c Set RS23S Macro Events x = 01~10 Macro Number y = 01~10 Macro Event Number z = a ASCII, h HEX a = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600, 7 115200 b = 0 None, 1 Odd, 2 Even c = RS232 Command Date