MFP72  Help Info
              
============= System Information Command
?             Print Help Information
HELP          Print Help Information
STATUS        Print System Status And Port Status
              RS232 Baudrate: 57600
============= System Control Command
PON           Power On, System Run On Normal State
POFF          Power Off, System Run On Power Save State
IR ON/OFF     Set System IR Control On Or Off
KEY ON/OFF    Set System KEY Control On Or Off
DBG ON/OFF    Set Debug Mode On Or Off
BEEP ON/OFF   Set Onboard Beep On Or Off
LCD ON/OFF    Set LCD Always On Or Auto Turn Off In Power On State
RESET         Reset System To Default Setting
              (Should Type "Yes" To Confirm, "No" To Discard)
============= Output Port Control Command
OUT xx FR yy  Set OUTPUT:xx From INPUT:yy
              xx=00: Select All OUTPUT Port
              xx=[01...02]: Select One OUTPUT Port
              yy=[01...04]: HDMI Input 01 ~ 04
              yy=AV: AV Input( Output 02 Only )
              yy=YPBPR: Component Input( Output 02 Only )
              yy=VGA: VGA Input( Output 02 Only )
OUT ADJ       Request VGA Input Auto Adjust
OUT OSD ON/OFF Set OSD Show On or Off
OUT SP/MX     Set OUTPUT To Splitter or Matrix Mode
OUT RES rr    Set Scaler Output Resolution
              (Change Output Resolution Will Effect EDID Setting)
              rr=01: 1080P@50Hz
              rr=02: 1080P@60Hz
              rr=03: 720P@50Hz
              rr=04: 720P@60Hz
              rr=05: 1280x1024@60Hz
              rr=06: 1024x768@60Hz
              rr=07: 1360x768@60Hz
              rr=08: 1440x900@60Hz
              rr=09: 1680x1050@60Hz
OUT FREQ mm   Set Output Frequence Mode
              When Output Resolution is 1080P or 720P
              mm=AUTO: Set Output Freq Auto Change To Input Freq
              mm=FORCE: Set Output Freq By CMD:OUT RES rr Select
OUT AR rr     Set Scaler Output Aspect Ratio
              rr=[00: Full Screen, 01: Keep Aspect Ratio]
              rr=[02: 16:9, 03: 4:3]
OUT ZOOM mm   Set Scaler Output Zoom Out Mode
              mm=00: No Zoom
              mm=[01: 2%, 02: 4%, 03: 6%, 04: 8%]
              mm=[05: 10%, 06: 12%, 07: 14%, 08: 16%]
OUT SCAN mm   Set Scaler Input Overscan Mode
              mm=00: No Overscan
              mm=[01: 2%, 02: 4%, 03: 6%, 04: 8%]
              mm=[05: 10%, 06: 12%, 07: 14%, 08: 16%]
============= Audio Control COmmand
AUD SCA ORG   Scaler Audio Input Follow Port Selection
AUD SCA ANA   Scaler Audio Input From Analog L/R Signal
VOL xx        Set Scaler Audio Volume
              xx=[00...30]: Volume Value
              xx=+: Volume Increase
              xx=-: Volume Decrease
MUTE ON/OFF   Set Scaler Audio Mute On Or Off
============= Input Port EDID Control Command
EDID xx CP yy Set Input:xx EDID Copy From Output:yy
EDID xx DF zz Set Input:xx EDID To Default EDID:zz
              (cmd: OUT RES rr Will Effect EDID Setting)
              xx=00: Select All INPUT Port
              xx=[01...04]: Select One INPUT Port
              yy=[01...02]: Select One OUTPUT Port
              zz=00: PC 1080p, HDMI 1080p, 2CH PCM
              zz=01: PC 1080p, HDMI 1080p, 5.1CH PCM/DTS/DB
              zz=02: PC 1080p, HDMI 1080p, 7.1CH PCM/DTS/DB/HD
              zz=03: PC 1080i, HDMI 1080i, 2CH PCM
              zz=04: PC 1080i, HDMI 1080i, 5.1CH PCM/DTS/DB
              zz=05: PC 1080i, HDMI 1080i, 7.1CH PCM/DTS/DB/HD
              zz=06: PC 1080p, HDMI 3D,    2CH PCM
              zz=07: PC 1080p, HDMI 3D,    5.1CH PCM/DTS/DB
              zz=08: PC 1080p, HDMI 3D,    7.1CH PCM/DTS/DB/HD
              zz=09: PC 4K2K,  HDMI 4K2K,  2CH PCM
              zz=10: PC 4K2K,  HDMI 4K2K,  5.1CH PCM/DTS/DB
              zz=11: PC 4K2K,  HDMI 4K2K,  7.1CH PCM/DTS/DB/HD
              zz=12: DVI 1280x1024@60Hz, Audio None
              zz=13: DVI 1920x1080@60Hz, Audio None
              zz=14: DVI 1920x1200@60Hz, Audio None
              zz=15: User EDID 1
              zz=16: User EDID 2
              zz=17: GUI Download EDID