Seamless HDMI MX44VW Help Info

============= System Information Command
HELP          Print Help Information
STATUS        Print System Status And Port Status
============= System Control Command
PON           Power On, System Run On Normal State
POFF          Power Off, System Run On Power Save State
IR ON/OFF     Set System IR Control On Or Off
KEY ON/OFF    Set System KEY Control On Or Off
DBG ON/OFF    Set Debug Mode On Or Off
BEEP ON/OFF   Set Onboard Beep On Or Off
LCD ON/OFF    Set LCD Always On Or Auto Turn Off When Power On

RESET         Reset System To Default Setting
RESET ALL     Reset System And Network To Default Setting
              (Should Type "Yes" To Confirm, "No" To Discard)
============= Input And Output Port Control Command
OUT MODE mm   Set Output Mode To mm
              mm=[MX]: Matrix, [MV]: Multi-View, [VW]: Video-Wall
              mm=[MV0]: Layout0, [MV1]: Layout1 ... [MV9]:Layout9
              mm=[VW22]: Video-Wall2x2, [VW41]: 4x1, [VW14]: 1x4
OUT xx ON/OFF Set OUTPUT:xx On Or Off
              xx=00: Select All OUTPUT Port
              xx=[01...04]: Select One OUTPUT Port
OUT xx FR yy  Set MATRIX/MULTI-VIEW OUTPUT:xx From INPUT:yy
              (MULTI-VIEW Main And Sub Picture Can Not
              Select The Same Input Source)
              xx=00: Select All OUTPUT Port
              xx=[01...04]: Select One OUTPUT Port
              yy=[01...04]: Select One INPUT Port
OUT VW FR yy  Set VIDEO-WALL OUTPUT From INPUT:yy
              yy=[01...04]: Select One INPUT Port
OUT xx VCL bb Set VIDEO-WALL Bezel Control:Left Border
OUT xx VCR bb Set VIDEO-WALL Bezel Control:Right Border
OUT xx VCT bb Set VIDEO-WALL Bezel Control:Top Border
OUT xx VCB bb Set VIDEO-WALL Bezel Control:Bottom Border
              xx=00: Select All OUTPUT Port
              xx=[01...04]: Select One OUTPUT Port
              yy=[01...04]: Select One INPUT Port
              bb=[00...100]: Set Border bb Pixels
IN xx FR yy   Set INPUT:xx From Signal:yy
              xx=00: Select All INPUT Port
              xx=[01...04]: Select One INPUT Port
              yy=HDMI: From HDMI Signal
              yy=VGA: From VGA Signal
EDID xx CP yy Set Input:xx EDID Copy From Output:yy
EDID xx DF zz Set Input:xx EDID To Default EDID:zz
              xx=00: Select All INPUT Port
              xx=[01...04]: Select One INPUT Port
              yy=[01...04]: Select One OUTPUT Port
              zz=00: HDMI 1080p@60Hz, Audio 2CH PCM
              zz=01: HDMI 1080i@60Hz, Audio 2CH PCM
              zz=02: DVI 1920x1080@60Hz, Audio None
              zz=03: DVI 1280x1024@60Hz, Audio None
              zz=04: DVI 1280x720@60Hz, Audio None
              zz=05: User EDID 1
              zz=06: User EDID 2
              zz=07: GUI Download EDID
============= Multi-View Control Command
MV AUD aa     Set Multi-View Output Audio From INPUT:aa
              aa=00: Follow Output 1 Selected Input Source
              aa=[01...04]: Fixed Select One INPUT Port
============= Network Control Command
NET DHCP ON/OFF : Set Auto IP(DHCP) ON Or OFF
NET IP xxx.xxx.xxx.xxx : Set IP Address
NET GW xxx.xxx.xxx.xxx : Set Gateway Address
NET SM xxx.xxx.xxx.xxx : Set Subnet Mask Address
NET RB : Set Network Reboot and Apply New Config!!!
NET TN xxxx : Set Telnet Port