NPA100DA Terminal Control System ================================================================ NPA100DA Help Info FW Version:MCU_Main 1.4.0/Web_GUI V1.4.0 ============================= System Information Command ?/HELP Print Help Information STATUS Print System Status And Port Status ============================= System Control Command PON Power On, System Run On Normal State POFF Power Off, System Run On Power Save State PWLED FOLLOW ON/OFF ON:Set System Power Led Follow LCD Status OFF:Set System Power Led Not Follow LCD Status, In Power On State,Power Led Always On RESET Reset System Settings To Default (Should Type "Yes" To Confirm, "No" To Discard) RESET ALL Reset System and Network Settings To Default (Should Type "Yes" To Confirm, "No" To Discard) REBOOT Set System Reboot AUTO STB xx Set System Auto Standby Time xx=0:Auto Standby Off xx=[1...120]:Auto Standby Time,(mins) AMPMODE xxx Set Amp Power to xxx xxx=2:PoE++ Type 4 Class 8 (71W) xxx=3:PoE++ Type 4 Class 7 (62W) xxx=4:PoE++ Type 3 Class 6 (51W) xxx=5:PoE++ Type 3 Class 5 (40W) xxx=6:PoE+ Type 2 Class 4 (25.5W) KEY ON/OFF Set System KEY Control On Or Off LCD ON/OFF/15/30/60 Set LCD Always On Or Auto Turn Off In Power On State Or Turn On 15s/30s/60s IR ON/OFF Set System IR Control On Or Off TRIG ON/OFF Set Trigger On Or Off CEC ON/OFF Set CEC Volume Control On Or Off RSB xx Set RS232 Baud Rate to xx bps xx=[1...3]:1:4800,2:9600,3:19200 xx=[4...6]:4:38400,5:57600,6:115200 FAN xx ON/OFF Set Onboard Fan:xx Auto Turn On Or Always Off xx=[0...2]:0:All,1:Fan1,2:Fan2 VOL+ Increase System Volume VOL- Decrease System Volume VOLxx Set System Volume Value to xx xx=[0...100]:Volume Value MUTE ON/OFF Set Mute On Or Off (Low level (0V) enable amplifier output, High level (5-12V) disable amplifier out) ============================= Input Control Command IN xx VOL yy Set Input:xx Volume to yy xx=[0...4]:0:All,1:DANTE,2:OPT,3:HDMI,4:LINE yy=[0...100]:Volume Value IN xx VOL+ Increase Input:xx Volume xx=[0...4]:0:All,1:DANTE,2:OPT,3:HDMI,4:LINE IN xx VOL- Decrease Input:xx Volume xx=[0...4]:0:All,1:DANTE,2:OPT,3:HDMI,4:LINE IN xx MUTE ON/OFF Set Input:xx Mute On Or Off xx=[0...4]:0:All,1:DANTE,2:OPT,3:HDMI,4:LINE MIC EN ON/OFF Set Mic Enable On Or Off MIC ONLY ON/OFF Set Mic Only On Or Off MIC MUTE ON/OFF Set Mic Mute On Or Off MIC AF ON/OFF Set Mic Anti Feedback On Or Off MIC AG ON/OFF Set Mic Auto Gain On Or Off MIC AD ON/OFF Set Mic Auto Duck On Or Off MIC EQ xx VAL yy Set Mic EQ:xx to Value:yy xx=[0...3]:EQ Index,0:ALL,1:250,2:1.25K,3:6.3K yy=[0...20]:Mic EQ Value MIC EQ RESET Set Mic EQ Reset MIC ADLV xx Set Mic Auto Duck Level to xx MIC ADSV xx Set Mic Auto Duck Sensitivity to xx xx=[0...100]:Duck Level MIC VOL xx Set Mic Volume to xx xx=[0...100]:Volume Value MIC VOL+ Increase Mic Volume MIC VOL- Decrease Mic Volume ============================= Output Control Command OUT xx FR yy Set Output:xx From Input:yy xx=[00-01] for all Output. (Not Support Single Out put Switching) yy=[0...4]:0:Default(DANTE),1:DANTE,2:OPT,3:HDMI,4 :LINE OUT xx VOL yy Set Output:xx Volume to yy xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[0...100]:Volume Value OUT xx VOL+ Increase Output:xx Volume xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE OUT xx VOL- Decrease Output:xx Volume xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE OUT xx MUTE ON/OFF Set Output:xx Mute On Or Off xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE OUT xx DLYT yy Set Output:xx Delay Time to yy(ms) xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[1..50]:Delay Time, Minisecond OUT xx PHASE yy INV ON/OFF Set Output:xx L-Inverter Or R-Inverter On Or Off xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[0,1]0:LEFT,1:RIGHT OUT xx MIX yy Set Output:xx Mix yy xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[1,2]:1:STEREO,2:LEFT-CH yy=[3,4]:3:RIGHT-CH,4:LEFT-CH and RIGHT-CH OUT xx EQ yy VAL zz Set Output:xx GEQ:yy to zz xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[1..31]:EQ Index zz=[0..20]:EQ Value OUT xx EQ PRESET yy Set Output:xx GEQ to Preset:yy xx=[0...3]:0:ALL,1:AMP,2:LINE,3:DANTE yy=[1...3]:1:Flat,2:Custom1,3:Custom2 ============================= Network Control Command NET DHCP ON/OFF Set Auto IP(DHCP) On Or Off NET IP xxx.xxx.xxx.xxx Set IP Address NET GW xxx.xxx.xxx.xxx Set Gateway Address NET SM xxx.xxx.xxx.xxx Set Subnet Mask Address NET TCPPORT xxxx Set TCP/IP Port NET TN xxxx Set Telnet Port NET RB Network Reboot and Apply New Config!!! NET DNS xxxx Set DNS Domain Name To xxxx ================================================================