8X8 Pro-Matrix Help Info
              

============= System Information Command
?/HELP        Print Help Information
STATUS        Print System Status And Port Status
============= System Control Command
PON           Power On, System Run On Normal State
POFF          Power Off, System Run On Power Save State
IR ON/OFF     Set System IR Control On Or Off
KEY ON/OFF    Set System KEY Control On Or Off
BEEP ON/OFF   Set Onboard Beep On Or Off
LCD ON/OFF    Set LCD Always On Or Auto Turn Off In Power On State
RSB x         Set RS232 Baud Rate to X bps
              x=[0:115200 1:57600, 2:38400, 3:19200, 4:9600]

RESET         Reset System To Default Setting
RESET ALL     Reset System And Network To Default Setting
        (Should Type "Yes" To Confirm, "No" To Discard)
============= Input And Output Port Connect Command
OUT xx ON/OFF Set OUTPUT:xx On Or Off
OUT xx FR yy  Set OUTPUT:xx From INPUT:yy
OUT xx EH/ET  Set OUTPUT:xx Use HDMI/HDBT EDID
        xx=[00]: All OUTPUT Port, [01...08]: OUTPUT Port
        yy=[01...08]: INPUT Port

POC TX yy ON/OFF Set OUTPUT:yy POC On Or Off
        yy=[00]: All OUTPUT Port, [01...08]: OUTPUT Port

PRESET STATUS : Print Preset Config Status
PRESET pp SET aa,bb,cc,dd,ee,ff,gg,hh : Set Preset:pp Config
PRESET pp SAVE : Save Current Output Connection To Preset:pp Config
PRESET pp APPLY : Apply Preset:pp Config To Output Connection
              pp=[01..08]: Select Preset Index
              aa=[01..08]: Output 01 From aa, [00]: Not Set
                 bb: Output 02 ... hh: Output 08
============= EDID Control Command
EDID xx CP yy Set Input:xx EDID Copy From Output:yy
EDID xx DF zz Set Input:xx EDID To Default EDID:zz
        xx=[00]: All INPUT Port, [01...08]: INPUT Port
        yy=[01...08]: OUTPUT Port
        zz=00: HDMI 1080p@60Hz, Audio 2CH PCM
        zz=01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
        zz=02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
        zz=03: HDMI 1080i@60Hz, Audio 2CH PCM
        zz=04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
        zz=05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
        zz=06: HDMI 1080p@60Hz/3D, Audio 2CH PCM
        zz=07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
        zz=08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
        zz=09: HDMI 4K@30Hz 4:4:4, Audio 2CH PCM
        zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
        zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
        zz=12: DVI 1280x1024@60Hz, Audio None
        zz=13: DVI 1920x1080@60Hz, Audio None
        zz=14: DVI 1920x1200@60Hz, Audio None
        zz=15: User EDID 1
        zz=16: User EDID 2
        zz=17: GUI Download EDID
        zz=18: HDMI 4K@60Hz 4:2:0, Audio 2CH PCM
        zz=19: HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
        zz=20: HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
        zz=21: HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
        zz=22: HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
        zz=23: HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
============= Matrix IR&RS-232 Connect Command
MXIR xx FR yy   Remote RX:xx IR Output From Local IR in:yy
        xx=[00]: All Remote Rx IR Output, [01...08]: Remote Rx IR Output
        yy=[01...08] Local IR In

MXIR GI (+-)xx  Global All Ir In Signal Goes To Which IR Output:xx
        xx=[09...16]: Local IR Output
        xx=[17...24]: Remote HDBT Receiver IR Output
        +: Add xx To Current Setting
        -: Remove xx From Current Setting

MXIR GO (+-)xx  Global All Ir Out Signal From Which IR Input:xx
        xx=[09...16]: Local IR Input
        xx=[17...24]: Remote HDBT Receiver IR Input
        xx=[25]: Global All Ir In
        +: Add xx To Current Setting
        -: Remove xx From Current Setting

MXRS xx TO yy   Local RS-232:xx Route To Remote HDBT:yy
        xx=[09]: Global RS-232
        yy=[00]: Not Connect To Any RS-232
        yy=[09...16]: Remote HDBT Receiver

MXSTA           Print Matrix IR And RS-232 Connect State
============= Audio Connect Command
AUD RX xx ORG   Input Port:xx Use Orginal Received HDMI/DVI Signal
AUD RX xx ANA   Input Port:xx Embed Analog L/R To HDMI/DVI Signal
AUD RX xx AUTO  Input Port:xx Embed Analog L/R When DVI Signal
        xx==[00]: All Input Port, [01...08]: Input Port

MUTE ON/OFF TX yy Set Output Audio:yy Mute On or Off
        yy=[00]: All Output Audio, [01...08]: Output Audio
AUD STA         Print Input/Output Port Audio Setting State
============= Network Control Command
NET DHCP ON/OFF : Set Auto IP(DHCP) ON Or OFF
NET IP xxx.xxx.xxx.xxx : Set IP Address
NET GW xxx.xxx.xxx.xxx : Set Gateway Address
NET SM xxx.xxx.xxx.xxx : Set Subnet Mask Address
NET RB : Set Network Reboot and Apply New Config!!!
NET TN xxxx : Set Telnet Port