================================================================ HMX88-18G 8x8 HDBaseT Matrix FW Version: V1.2.0 ============= System Information Commands ?/HELP Print Help Information STATUS Print System Status And Port Status INSTA Print All Input Status OUTSTA Print All Output Status CTRLSTA Print All Control Status PRESETSTATUS Print All Preset Configurations AUDSTA Print All Audio Status FWVERSION Print FW Version ============= System Control Commands PON/OFF Set System Power On Or Off KEY ON/OFF Set System Key Control On Or Off IR ON/OFF Set System Front Panel IR Control On Or Off LCD ON/OFF Set LCD Always On Or Set LCD Off After No Operation 30 Seconds IROUTxx ON Enable IR Remote-control Mode On HDBT Output xx IROUTxx OFF Disable IR Remote-control Mode On HDBT Output xx RESET Reset System To Default Setting (Type "Yes" To Confirm, Or Send Other Command To Discard) OUTxx EH Priority Output for EDID Copy and CEC = HDMI OUTxx ET Priority Output for EDID Copy and CEC = HDBT xx = 00 : Output 1&2 xx = [01-02] : Output 1 - 2 POCOUTxx ON Set PoC On On Output xx POCOUTxx OFF Set PoC Off On Output xx OUT xx GUEST ON Set System Guest Mode xx On OUT xx GUEST OFF Set System Guest Mode xx Off (Please note, this will disconnect any active telnet connections to this matrix) INyy ON Set Input yy On INyy OFF Set Input yy Off OUTxx ON Set Output xx On OUTxx OFF Set Output xx Off OUTxx LRM ON Set Output xx Long Reach Mode On OUTxx LRM OFF Set Output xx Long Reach Mode Off OUTxx FR yy Set Output xx From Input yy xx = 00 : All Outputs xx = [01-08] : Output 1 - 8 yy = [01-08] : Input 1 - 8 AUDIOxx FR yy Set Audio Output xx From Input yy xx = 00 : All Outputs xx = [01-08] : Output 1 - 8 yy = [01-08] : Audio From Input 1-8 yy = [09-16] : Audio From Output 1-8 yy = [17-24] : Audio From ARC 1-8 yy = [25] : Optical Input yy = [33] : Analogue Input MXIR xx FR yy Local Matrix IR Out xx From Remote Rx yy IR In xx = [01-08] : Local IR Out 1 - 8 yy = 00 : All Remote Rx IR In yy = [01-08] : Remote Rx IR In 1 - 8 MUTE mm TX xx Turn Mute On/Off On Output xx mm = On mm = Off xx = 00 : All Outputs xx = [01-08] : Analogue Output 1 To 8 xx = [09-16] : Optical Output 1 To 8 AUDOUT xx mm Turn Mute On/Off On Output xx mm = On mm = Off xx = 00 : All Outputs xx = [01-08] : Analogue Output 1 To 8 xx = [09-16] : Optical Output 1 To 8 VOL xx TX yy Set Volume Level xx On Output yy xx = [0...100] : Set Volume Level xx = + : Volume Level Increases xx = - : Volume Level Decreases yy = 00 : Select All Output Ports yy = [01-08] : Select Single Output Port 01 To 08 OUT xx ARC aa Set RX On Output xx To ARC Mode aa xx = 00 : All Outputs xx = [01-08] : Output 1 - 8 aa = 01 : ARC From Optical aa = 02 : ARC From HDMI OUT xx SCALING ON/OFF Set Output xx Scaling ON/OFF xx = 00 : All Outputs xx = [01-08] : Output 1 - 8 IRFV ON/OFF Local Matrix IR Out Follow Video Switching ON/OFF OUT xx IRHEXSEND yy Send Pronto Hex Code To Remote End xx = 00 : All Outputs xx = [01-08] : Output 1 - 8 yy = IR Value(Hex Format) EDID xx DF yy Set Input xx EDID To Default EDID yy xx = Input On Product (00 Refers To ALL Inputs, 02 = Input 2 Etc) yy = 00 : HDMI 1080p@60Hz, Audio 2CH PCM (Default) 01 : HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY 02 : HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD 03 : HDMI 1080i@60Hz, Audio 2CH PCM 04 : HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY 05 : HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD 06 : HDMI 1080p@60Hz/3D, Audio 2CH PCM 07 : HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY 08 : HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD 09 : HDMI 4K@30Hz 4:4:4, Audio 2CH PCM 10 : HDMI 4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY 11 : HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD 12 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 2CH PCM 13 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY 14 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD 15 : HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM 16 : HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY 17 : HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD 18 : HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 2CH PCM 19 : HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 5.1CH DTS/DOLBY 20 : HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 7.1CH DTS/DOLBY/HD 21 : HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 2CH PCM 22 : HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 5.1CH DTS/DOLBY 23 : HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 7.1CH DTS/DOLBY/HD 24 : HDMI 4K@60Hz 4:4:4, HDR 10-bit(Inc DV), Audio 2CH PCM 25 : HDMI 4K@60Hz 4:4:4, HDR 10-bit(Inc DV), Audio 5.1CH DTS/DOLBY 26 : HDMI 4K@60Hz 4:4:4, HDR 10-bit(Inc DV), Audio 7.1CH DTS/DOLBY/HD 27 : HDMI 4K@60Hz 4:4:4, HDR 12-bit(Inc DV), Audio 2CH PCM 28 : HDMI 4K@60Hz 4:4:4, HDR 12-bit(Inc DV), Audio 5.1CH DTS/DOLBY 29 : HDMI 4K@60Hz 4:4:4, HDR 12-bit(Inc DV), Audio 7.1CH DTS/DOLBY/HD 30 : DVI 1280x1024@60Hz, Audio None 31 : DVI 1920x1080@60Hz, Audio None 32 : DVI 1920x1200@60Hz, Audio None 33 : HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM 34 : User EDID 1 35 : User EDID 2 36 : EDID pass-through (copy from Sink 1) EDID xx CP yy Copy EDID From Output yy To Input xx xx = [00-08] : 00 : All Inputs ,Input 1 - 8 yy = [01-08] : Output 1 - 8 EDID SAVE xx TO yy Save External EDID xx Into Slot yy xx = [01-08]: EDID Copy Output 1 - 8 xx = 00: EDID Via RS232 Send To Matrix yy = 00: All User EDID yy = 01 or 34: User EDID 1 yy = 02 or 35: User EDID 2 PRESET xx SAVE Save Current Output Connections To Preset xx Config PRESET xx CLR Delete Preset xx Config xx = [00-09] : 00 : All Presets, Preset 1 - 9 PRESET xx APPLY Apply Preset xx Config To Output Connection xx = [01-09] : Presets 1 - 9 ============= Output CEC Control Commands OUTxx CEC ENABLE Enable CEC Control On Output xx OUTxx CEC DISABLE Disable CEC Control On Output xx OUTxx CEC OK Confirm Operation (Enter) On Output xx OUTxx CEC UP UP On Output xx OUTxx CEC DOWN DOWN On Output xx OUTxx CEC LEFT LEFT On Output xx OUTxx CEC RIGHT RIGHT On Output xx OUTxx CEC RETURN RETURN On Output xx OUTxx CEC EXIT EXIT On Output xx OUTxx CEC VOLUP VOLUME UP On Output xx OUTxx CEC VOLDOWN VOLUME DOWN On Output xx OUTxx CEC MUTE Toggle Audio MUTE Status On Output xx OUTxx CEC PLAY PLAY On Output xx OUTxx CEC STOP STOP On Output xx OUTxx CEC PAUSE PAUSE On Output xx OUTxx CEC RECORD RECORD On Output xx OUTxx CEC INPUTyy Input Channel yy Selection On Output xx, The Operation Needs To Wait For TV Communication To Succeed xx = 00: All Output Port xx = [01-08]: Output 1 - 8 yy = [01-04]: TV's HDMI Input 1 - 4 yy = [00]: Current HDMI Input yy = []:(No Parameter) Will Show Input Select Menu If TV Support OUTxx CEC POFF POWER OFF On Output xx OUTxx CEC PON POWER ON On Output xx xx = 00: All Output Port xx = [01-08]: Output 1 - 8 ============= Input CEC Control Commands INxx CEC ENABLE Enable CEC Control On Input xx INxx CEC DISABLE Disable CEC Control On Input xx INxx CEC OK Confirm Operation (Enter) On Input xx INxx CEC UP UP On Input xx INxx CEC DOWN DOWN On Input xx INxx CEC LEFT LEFT On Input xx INxx CEC RIGHT RIGHT On Input xx INxx CEC RETURN RETURN On Input xx INxx CEC EXIT EXIT On Input xx INxx CEC VOLUP VOLUME UP On Input xx INxx CEC VOLDOWN VOLUME DOWN On Input xx INxx CEC PLAY PLAY On Input xx INxx CEC STOP STOP On Input xx INxx CEC PAUSE PAUSE On Input xx INxx CEC RECORD RECORD On Input xx INxx CEC REWIND REWIND On Input xx INxx CEC FF FAST FORWARD On Input xx INxx CEC FWD FORWARD On Input xx INxx CEC BWD BACKWARD On Input xx INxx CEC POFF POWER OFF On Input xx INxx CEC PON POWER ON On Input xx xx = 00: All Input Port xx = [01-08]: Input 1 - 8 ============= RS232 User CEC Commands CECUSERCMD u8DevID: 00 Select All CEC Input Port u8DevID: [01-08] Input 1 - 8 u8DevID: F0 Select All CEC Output Port u8DevID: [F1-F8] Output 1 - 8 pu8Operand[MAX] : MAX 0 - 14 Eg:CECUSERCMD (ALL OUT CEC VOLUP) Eg:CECUSERCMD (ALL OUT CEC VOLDOWN) ============= RS232 Control Commands RS232BAUD xx Set RS232 Baud Rate To xx xx = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 OUT xx RS232SEND yy:zz:aa:bb Send b To RS232 Port xx And Wait yy Seconds For Feedback xx = 00 : Local RS232 Port xx = [01-08] : Output 1 - 8 yy = [00-10] : Wait For The Feedback yy Seconds zz = a ASCII, h HEX aa = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 bb = RS232 command RS232DLYOUTxx:yy Set Send Output xx Interval Time In yy Seconds Between RS232 On And User Commands xx = 00: All Output Port xx = [01-08]: Output 1 - 8 yy = [0-180]: Delay yy Seconds RS232OUTxx ON :Enable RS232 Remote-control Mode On HDBT Output xx RS232OUTxx OFF:Disable RS232 Remote-control Mode On HDBT Output xx RS232ONOUTxx yy:zz:aa:bb Save RS232ON Commands To Output xx xx = 00: All Output Port xx = [01-08]: Output 1 - 8 yy = 1 RS232 Display On yy = 2 RS232 Display Input Select yy = 3 RS232 User Command 1 yy = 4 RS232 User Command 2 yy = 5 RS232 User Command 3 zz = a ASCII, h HEX aa = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 bb = RS232 Command RS232OFFOUTxx zz:aa:bb Save RS232OFF Command To Output xx zz= a ASCII, h HEX aa = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200 bb = RS232 Command RS232ONOUTxx DISABLE Disable Auto RS232 Commands When Detecting A Signal On Output xx RS232OFFOUTxx DISABLE Disable Auto RS232 Commands When Not Detecting A Signal On Output xx xx = 00: All Output Port xx = [01-08]: Output 1 - 8 ============= Network Control Commands NET DHCP ON/OFF Set Auto IP(DHCP) On Or Off NET TN ON/OFF Set Telnet Port On Or Off NET TN8000 ON/OFF Set Telnet Port 8000 On Or Off NET MDNS ON/OFF Set mDNS On Or Off NET IP xxx.xxx.xxx.xxx Set IP Address NET GW xxx.xxx.xxx.xxx Set Gateway Address NET SM xxx.xxx.xxx.xxx Set Subnet Mask Address NET RB Set Network Reboot And Apply New Config!!! NET TN xxxx Set Telnet Port ================================================================