IP200UHD-RX

• Advanced UHD video over 1GB Network
• Virtually unlimited system size
• Extends HDMI up to a distance of 100m over a single CAT cable
• Video up-scaling and down-scaling

• Supports up to 4K @ 30Hz UHD video output

• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

• Advanced signal management for independent routing of IR, RS-232, USB / KVM, audio and video
• PoE (Power over Ethernet) to power Blustream products from PoE switch
• HDCP 2.2 compliant with advanced EDID management
• Analogue L/R audio breakout

• LAN loop-out for one-to-many extender mode

• Local 24-56V power supply (should Ethernet switch not support PoE) - sold separately

• Features 4 operational modes:

   - Matrix distribution (requires 1GB network switch)

   - Video wall (requires 1GB network switch)

   - One-to-one HDMI extender (no network switch required)

   - One-to-many HDMI extender (no network switch required)


• Video Input Connectors: 1 x LAN RJ45 connector
• Video Output Connectors: 1 x HDMI Type A, female 
• Latency: 1 Frame (16-33ms depending on frame rate)
• Audio Output Connectors: 2 x RCA L/R Analogue audio  
• Ethernet Port: 1 x LAN RJ45 connector (video extension)  
• RS-232 Serial Port: 1 x 3-Pin Phoenix connector  
• USB/KVM Port: 2 x USB - Type A  
• IR Input Ports: 1 x 3.5mm stereo jack  
• IR Output Ports: 1 x 3.5mm mono jack
• PoE draw: 7.0W (typical), 8.3W (max load)
• Firmware Update (MCU): 1x Micro-USB  
• Mounting Kit Included  
• Dimensions (W x D x H ): 190mm x 114mm x 25mm   
• Shipping Weight: 0.8kg  
• Operating Temperature: 32°F to 104°F (0°C to 40°C)  
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)

1 x IP200UHD-RX 
1 x (IRR) IR Receiver 
1 x (IR1) IR Transmitter 
1 x Serial 3-pin Phoenix Connector 
1 x Mounting Kit

Download firmware